✕
  1. Home
  2. mini project topics in mechanical engineering

Tag: mini project topics in mechanical engineering

Nnamdi Azikiwe University, Awka Faculty Of Engineering Department Of Mechanical Engineering Modeling And Evaluation Of A Passive Flat-Plate Solar Collector – Complete project material

ABSTRACT This work investigated the variation of top loss heat transfer coefficientwith the emittance of the absorber plate, the collector tilt angle and airgap spacing between the absorber plate and the cover plate. The effects…

Read More

Modelling Procedure For Testing The Efficiency Of The Different Concepts And Strategies Of Supply Chain Management – Complete project material

ABSTRACT For any manufacturing and production process to be profitable, a cost effective supply chain is necessary.  Improving the quality of all supply chain processes results in; reduce cost, improve resource utilization, and improve process…

Read More

Modelling And Simulation Of Biodiesel Blends Performance In Compression Ignition Engines – Complete project material

ABSTRACT   This research was conducted to investigate the suitability of using a renewable, sustainable and environmentally friendly biodiesel as part or full substitute of the petroleum diesel. Biodiesel from Cotton, Jatropha and Neem seeds,…

Read More

Microstructure And Mechanical Properties Of Epoxy – Rice Husk Ash Composite – Complete project material

ABSTRACT This study is about the production and characterization of epoxy-rice huskash composite. Composites were produced at 10%,20%,30%,40% and 50%volume fraction of Rice Husk Ash(RHA) fillers and the epoxy was cast neat at0%RHA which served…

Read More

Mechanical Properties 0f An Aluminium Or Silicon – Complete project material

CHAPTER ONE INTRODUCTION A composite is considered to be any multi phase material that exhibits a significant proportion of the properties of both constituent phases such that a better combination of properties is realized. This…

Read More

Measurement And Evaluation Of The Performance Properties Of Selected Locally Produced Lubricants (Engine Oil) – Complete project material

ABSTRACT   The performance of the oils selected in this work was tested for considering Viscosity, Viscosity Index, Density, Flash Point, Pour Point, and Carbon Residue. The most important of all the properties which makes…

Read More

Manufacturing Strategies For The Cassava Industry In Nigeria – Complete project material

ABSTRACT This study employs the “SWOT matrix” technique to formulate manufacturing strategies for the cassava industry in Nigeria. The motivation for the study is the seemingly wide gap between the supply and demand for manufactured…

Read More

Investigation Of Mechanical Properties Of Zeolite-Y And Zsm-5 Catalysts Synthesized From Locally Available Clays – Complete project material

  ABSTRACT   This research work was centred on mechanical properties of zeolite-Y and ZSM-5 catalysts synthesized from locally available clays such as Kaolin, Alumina, Gambe and Pindiga respectively. Pressure absorption capacities of the synthesised…

Read More

Integration Of Atomizer Into Economizer System In Petrol Engines – Complete project material

ABSTRACT The thesis is aimed at designing a fuel atomizer device to be incorporated in a fuel economizer system for use in petrol engines for more efficient fuel consumption. The principle adopted is based on…

Read More

Improvement Of The Performance Of Thermal Power Systems Through Energy And Exergy Analysis – Complete project material

ABSTRACT This research work is aimed at using the energy and exergy analysis with thermodynamicdata to suggest improvements in the performance of steam and gas turbine power plants. Inthis regard, specific data from Egbin steam…

Read More
Need Help? Chat with us